Precautions when using aluminum alloy vents
1. Magnesium oxide and magnesium chloride used in the processing of aluminum alloy vents should be properly stored, pay attention to fire prevention and not be exposed to direct sunlight. The useless magnesium oxide, magnesium chloride and material packaging containers should not be thrown away or incinerated at will, and should be piled up for disposal.
2.When manufacturing aluminum alloy vents on site, install electric fans or fans at 1--2 meters apart from the cut channel to blow the dust generated during the cutting to an open area with relatively good ventilation, and reduce the dust produced by the personnel. The inhalation and the effect on vision.
3. Til overførsel af aluminiumslegeringsventiler skal passende arbejdskraft arrangeres i henhold til volumen og vægten af forskellige rørsektioner. The processing site conditions allow it to be transported by flatbed trucks. Multi-person overførsel af aluminiumslegering tuyere skal arbejde hårdt sammen, håndtere det forsigtigt, og stable det pænt op.
4. Under forarbejdningen vil der forekomme støv eller fiberflyvning i aluminiumslegeringsventilerne. The personnel who cut the aluminum vents on site must wear dust-proof goggles and masks to avoid inhalation of the fine dust generated during the cutting.
